Sharp AR-BC260 Service Manual page 160

Item Set value
BELT 50
100
FUSER 50
100
22
22 -1
Purpose Adjustment/Setting/Operation data output and check
(display, print)
Function Used to check the print count value in each section
(Purpose) and each operation mode. (Used to check the
maintenance timing.)
Item Counter
Operation/ The counter values are displayed.
Procedure
(Counter values to be displayed)
TOTAL BW All valid paper counters (B/W)
TOTAL COL All valid paper counters (Color)
PRINTER BW Print counter (B/W)
PRINTER COL Print counter (Color)
SINGLE COLOR Single color
COPY BW Copy counter (B/W)
COPY COL Copy counter (Color)
FAX PRINT FAX print counter (B/W only)
OTHERS BW Other counter (B/W only)
OTHERS COL Other counter (Color)
MAINTENANCE ALL Maintenance counter (Total)
MAINTENANCE COL Maintenance counter (Color)
BELT UNIT Transfer unit print counter
BELT UNIT RANGE Transfer unit accumulated mileage
BELT UNIT DAY Transfer unit use days
FUSER UNIT Fusing unit print counter
FUSER ACUM DAY Fusing unit use days
BELT WTN STS Display of transfer section waste toner
full detection state (NONE: Neither of
Full or Near Full, NEA: Near Full state,
FULL: Full state)
BELT WTN END Print quantity after transfer section
waste toner near full detection (The
numerator indicates the print quantity
after waste toner near full detection.
The denominator indicates the printable
quantity after waste toner near full
detection.)
Content Default
50K 100K
100K
50K 100K
100K
AR-BC260 SIMULATION 9 - 22
22 -2
Purpose Adjustment/Setting/Operation data output, check
(display, print)
Function Used to check the total misfeed count and the total
(Purpose) trouble count. (If the misfeed count is considerably
great, it may be judged as necessary to repair. By
dividing this count by the total count, the misfeed
rate can be obtained.)
Item Trouble
Operation/ The counter values are displayed.
Procedure
(Display contents)
Display
MACHINE JAM Machine jam counter
RSPF JAM Automatic document feeder jam counter
TROUBLE Trouble counter
22 -3
Purpose Adjustment/Setting/Operation data output, check
(display, print)
Function Used to check misfeed positions and the misfeed
(Purpose) count of each position. (If the misfeed count is
considerably great, it may be judged as necessary to
repair.) (Machine section only)
Item Trouble
Operation/ Used to display the misfeed history.
Procedure
The misfeed history sections are displayed sequentially from the
latest one. Max. 50 items of information can be stored, and the
oldest one is deleted sequentially. The trouble position may be
presumed with this data.
(Jam code list)
Group Sensor Display
Paper – ********
feed
PFD1 TRAY1
PFD1_ND1
PFD1_ND2
PFD1_ND3
PFD1_NDU PFD1 not-reached jam (ADU
PFD1_ST1
PFD1_SD1
PFD1_SD2
PFD1_SD3
PFD1_SDU PFD1 remaining jam (ADU
Content
Misfeed
Comment
Tray 1 paper feed jam (PFD1
not-reached jam)
PFD1 not-reached jam (Desk
1 feed paper)
PFD1 not-reached jam (Desk
2 feed paper)
PFD1 not-reached jam (Desk
3 feed paper)
feed paper)
PFD1 remaining jam (Tray 1
feed paper)
PFD1 remaining jam (Desk 1
feed paper)
PFD1 remaining jam (Desk 2
feed paper)
PFD1 remaining jam (Desk 3
feed paper)
feed paper)