Sharp AR-BC260 Service Manual page 75

<3> Transport roller 1
1) Remove the vertical transport unit.
2) Remove the resin ring. Remove the pulley (A) from the belt.
3) Remove the resin E-ring, slide the bearing (B), and remove
the transport roller 1 (C).
A
<4> PS unit
1) Remove the vertical transport unit.
2) Remove the screw and the spring. Release the lock. Remove
the belt and remove the PS unit.
∗ When assembling, attach from the left with avoiding the
plate in section A.
A
B
C
AR-BC260 DESCRIPTIONS OF EACH SECTION 7 - 38
<5> Upper resist roller
1) Remove the vertical transport unit.
2) Remove the PS unit.
3) Remove the spring (A), and remove the upper resist roller (B).
B
A
<6> Lower resist roller
1) Remove the vertical transport unit.
2) Remove the PS unit.
3) Remove the upper resist roller.
4) Remove the parts and remove the lower resist roller.
A