External Fitting - Sharp AR-BC260 Service Manual

8. External fitting

A. Disassembly
(1) Cabinet disassembly 1
1) Open the front cabinet.
2) Remove the front cabinet band. Pull out the slide pin (B), and
remove the front cabinet (C).
B
A
(2) Cabinet disassembly 2
1) Remove the front cabinet.
2) Open the left cabinet. Remove the screw and remove the front
frame cover.
(3) Cabinet disassembly 3
1) Remove the screw, and slide the paper exit tray cabinet right
to the right to remove.
B
A
C
AR-BC260 DESCRIPTIONS OF EACH SECTION 7 - 51
(4) Cabinet disassembly 4
1) Remove the screw, and remove the rear cabinet (A). Remove
the screw, and remove the DC power CFM unit (B) and the
connector. Remove the screw, and remove the upper cabinet
rear cover (C).
∗ When assembling, insert the boss in section D into the hole
in the frame.
B
D
(5) Cabinet disassembly 5
1) Remove the manual paper feed unit.
2) Pull out the cassette and the knob.
3) Open the front cabinet.
4) Remove the screw.
5) Lift the cabinet, and slide and remove the front right cabinet
(A) upward.
C
A
A