Download  Print this page

Deleting Clips; Adding/deleting Clip Flags (exfat, Udf); Filtering The Clips Displayed Using The Filtered Clip Thumbnail Screen (exfat, Udf) - Sony PXW-Z280T Operating Instructions Manual

Solid-state memory camcorder.
Hide thumbs

Advertisement

Copying all clips
You can copy all clips stored on the same SxS
memory card at the same time to another SxS
memory card.
1
Select Copy Clip > All Clips >Execute in
the Thumbnail menu.
A confirmation screen appears.
2
Select Execute.
All clips are copied, and a completion
message appears.
3
Press the SET button or SEL/SET dial
to dismiss the message.

Deleting clips

You can delete clips from SxS memory cards.
Note
• Protected clips cannot be deleted. To delete, first
unlock the clip.
Deleting a specific clip
1
Select Delete Clip >Select Clip >Execute
in the Thumbnail menu.
The clip selection screen appears.
2
Select the clip to delete.
A check mark is attached to the selected clip.
3
Press the MENU button.
A confirmation screen appears.
4
Select Execute.
The clip is deleted, and a completion
message appears.
5
Press the SET button or SEL/SET dial
to dismiss the message.
Deleting all clips
1
Select Delete Clip > All Clips >Execute
in the Thumbnail menu.
A confirmation screen appears.
2
Select Execute.
All clips are deleted, and a completion
message appears.
3
Press the SET button or SEL/SET dial
to dismiss the message.
Adding/deleting clip flags (exFAT,
UDF)
You can add clip flags (OK, NG, KEEP marks) to
clips to filter the display of clips based on the clip
flags on the filtered clip thumbnail screen
(page 77).
Adding a clip flag
1
Select the thumbnail for the clip to
which you want to add the clip flag.
2
Select Set Clip Flag >Add OK, Add NG,
or Add KEEP in the Thumbnail menu
for the type of clip flag to add.
The clip flag is added to the thumbnail of the
selected clip.
You can also assign Clip Flag OK, Clip Flag NG,
and Clip Flag Keep to assignable buttons
(page 40), and press the button to add a clip flag.
Deleting a clip flag
1
Select the thumbnail for the clip to
which you want to delete a clip flag.
2
Select Set Clip Flag >Delete Clip Flag in
the Thumbnail menu.
The clip flag for the selected clip is deleted.
Filtering the clips displayed using
the filtered clip thumbnail screen
(exFAT, UDF)
Select Filter Clips > OK, NG, or KEEP
>Execute in the Thumbnail menu to filter
the clips by clip flags.
The clip screen appears showing the clips filtered
by the selected clip flag. This screen is referred to
as the filtered clip thumbnail screen.
77

Advertisement

Table of Contents

   Related Manuals for Sony PXW-Z280T

This manual is also suitable for:

Pxw-z280v

Comments to this Manuals

Symbols: 0
Latest comments: