Returning The Scene File Settings To The Standard Settings; Jumping To A File-Related Menu Page When Inserting A "Memory Stick - Sony POWER HD FX PDW-700 Operation Manual

P01 SCENE RECALL
RECALL OK?
DISPLAY MODE
001.SCENE1
002.SCENE2
003.NO FILE
004.SCENE4
005.SCENE5
***.5FILE LOAD
5
To carry out the load (recall), select
YES and press the MENU knob.
To cancel, press the MENU knob leaving b
pointing to NO.
When loading is complete, the message
"COMPLETE" appears and the access
indicator goes off.
Notes
• The scene files loaded from the "Memory Stick"
overwrite data saved in the camcorder memory.
• To load the scene file saved in the camcorder
memory when the "Memory Stick" is inserted,
return to the P00 SCENE RECALL page and load
the desired scene file in the camcorder memory.
• When there is no file to be loaded (shown as "NO
FILE"), an existing file of the same number is
unaffected. In the example shown in step 4,
MEM3 is not overwritten.
Returning the scene file settings
to the standard settings
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the SCENE FILE page of the
FILE menu, and press the MENU knob.
For details on menu operations, see "Basic
menu operations" on page 163.
2
Select STANDARD, and press the
MENU knob.
s displayed on the left of STANDARD
changes to x. When x changes to s once
again, the settings of the camcorder are reset
to the standard settings.
If you press the MENU knob again while x
is displayed, the operation is cancelled and
the camcorder returns to the settings before
STANDARD was selected.
192

Jumping to a File-Related Menu Page When Inserting a "Memory Stick"

ESC
YES NO
: ALL
MEM1-5
A "Memory Stick" enables you to save user files,
scene files, lens files, reference files and ALL
files.
The camcorder menu system allows you to make
a setting so that when a "Memory Stick" holding
these files is inserted while in menu operating
mode, a menu page relating to the desired file is
automatically displayed on the screen. Thus you
can proceed to file operation quickly. This is very
convenient especially when you manage data files
using "Memory Stick"s.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
2
3
In the following cases, jumping to the target page is
impossible.
• When the power is turned on after you insert a
• When OFF is selected on the MS IN > JUMP TO page.
Jumping to a File-Related
Menu Page When Inserting
a "Memory Stick"
Display the MEMORY STICK page of
the FILE menu, and press the MENU
knob.
For details on menu operations, see "Basic
menu operations" on page 163.
Select MS IN > JUMP TO, and press the
MENU knob.
The MS IN > JUMP TO page allows you to
select one of the following settings.
Setting Description
OFF Disables this function. Menu pages
do not change when a "Memory
Stick" is inserted.
USER Jumps to the USER FILE page.
ALL Jumps to the ALL FILE page.
SCENE Jumps to the SCENE FILE page.
LENS Jumps to the LENS FILE 1 page.
REFER Jumps to the REFERENCE page.
USER 1 Jumps to the USER 1 FILE page.
Turn the MENU knob until the name of
the desired file page appears, then press
the MENU knob.
Notes
"Memory Stick".