Table of Contents
Advertisement
2. Display the contents of the \MPASS directory and click the right mouse
3. In the displayed menu, click Create Shortcut. (A shortcut item appears.)
4. Click the plus (+) signs next to the Windows folder, the Start Menu folder,
5. Drag the shortcut item (created in Step 3) to the StartUp folder.
The MultiPASS Background will be automatically started when you start
Windows.
Disconnecting the MultiPASS L90
You can disconnect the MultiPASS L90 if you want to use the parallel port for
another purpose. Before disconnecting your unit, be sure to close the MultiPASS
Background.
1. Turn off your computer.
2. Unplug your computer from all electrical sources.
3. Unplug the MultiPASS L90 from all electrical sources.
4. On the back of your computer, remove the cable connector from the parallel
5. On the MultiPASS L90, release the wire clips and remove the cable connector
6. Plug your computer back in to the electrical source.
Chapter 8
button on MPSERVER.EXE.
and then the Programs folder.
printer port.
from the port.
MultiPASS L90 Setup and Other Utilities in the Desktop Manager
8-29
Advertisement
Table of Contents
