Table of Contents
Advertisement
Fax/Telephone Receive Mode
You set whether the MultiPASS L90 should accept only calls from fax
machines, or should receive both fax and telephone calls.
If you set the MultiPASS L90 to receive both fax and telephone calls, the
MultiPASS L90 rings for all incoming telephone calls. However, the
MultiPASS L90 rings for an incoming fax call only if you select the Answer
Audible option on the Receive Fax dialog box (described in the "Setting Up
Receive Fax Options" section in this chapter).
Fax/Telephone Ring Tone
You set the volume level of the ring tone.
Fax/Telephone Start Time
When a call is received, the MultiPASS L90 checks to see if the call is from a
fax machine or a telephone. If your MultiPASS L90 does not have enough
time to detect the fax tone, it assumes the call is from a telephone. You use
this option to set the appropriate amount of time to allow the MultiPASS L90
to check for the type of call.
Fax/Telephone Ring Time
When your MultiPASS L90 is set to receive both fax and telephone calls, it
rings to inform you of an incoming telephone call. If you do not pick up the
handset within a certain amount of time, the MultiPASS L90 stops ringing.
You use this option to set the appropriate amount of time the MultiPASS L90
should ring.
Fax/Telephone Switch Action
You set this option to Receive if you want the MultiPASS L90 to handle an
incoming call, detected as a telephone call that is not answered, as an
incoming fax. If no fax is received, the line is then disconnected. If you set this
option to Disconnect, the MultiPASS L90 automatically disconnects the
unanswered call, without switching to try and receive a fax.
Manual/Auto Switch Mode
To prevent missing incoming documents when the MultiPASS L90 is set to
manual receiving, you can set the unit to automatically answer the phone and
switch to automatic, receiving the incoming fax after a certain number of
rings.
Chapter 8
MultiPASS L90 Setup and Other Utilities in the Desktop Manager
8-13
Advertisement
Table of Contents
