Table of Contents
Advertisement
To restart the MultiPASS Background (Windows 3.1x):
On the Windows desktop, in the Canon MultiPASS L90 Utilities group, double-
click MultiPASS Background.
The MultiPASS Background starts automatically.
To restart the MultiPASS Background (Windows 95):
1. On the Windows desktop, click Start and then point to Programs.
2. On the Programs menu, point to Canon MultiPASS L90 Utilities. Then click
The MultiPASS Background starts automatically.
Adding MultiPASS Background to StartUp
When you reconnect your MultiPASS L90 device, you will probably want to add
the MultiPASS Background to the StartUp group again (if you removed it as
described earlier). With the MultiPASS Background in StartUp, the MultiPASS
Background automatically opens when Windows is started.
The following instructions summarize the procedures for adding a program to
Windows StartUp. For more details, refer to your Windows user documentation.
To add MultiPASS Background to StartUp (Windows 3.1x):
1. On the Program Manager, display the Canon MultiPASS L90 Utilities and
2. While holding down the Control key, drag the MultiPASS Background icon
A copy of the MultiPASS Background icon is placed in the StartUp group.
To add MultiPASS Background to StartUp (Windows 95):
1. Open the Windows Explorer.
8-28
MultiPASS L90 Setup and Other Utilities in the Desktop Manager
MultiPASS Background.
StartUp groups.
from the Canon MultiPASS L90 Utilities group to the StartUp group.
Chapter 8
Advertisement
Table of Contents
