Table of Contents
Advertisement
Chapter 2
If you have Windows 95, the system automatically detects the MultiPASS L90
as a new device, displaying a detection message allowing you to respond
appropriately. For details on how to proceed when the device is detected,
refer to the "Installing in Windows 95" section in this chapter.
Make a backup copy of the printer driver and Desktop Manager diskettes
provided in the package.
For more information about backing up discs, refer to your Windows user
documentation.
Prepare the following fax setup information, entered during installation:
Fax Heading
The name you want to appear in the fax header (your name or company
name), which appears at the top margin of each page of a fax transmission.
Fax Number
The number for the fax line connected to your MultiPASS L90. This
information is printed in the fax header, which appears at the top margin
of each page of a fax transmission.
Company
Name of your company. This information is available for printing on a fax
cover page.
Outside Dialling Prefix
If applicable, the number for accessing an outside line through your office
phone system (typically the number 9).
Fax Receive Mode
The method by which you want the MultiPASS L90 to handle incoming
faxes when your PC is on: upload the fax directly to the Desktop Manager
or print the fax from the MultiPASS L90.
Installing the Desktop Manager Software
2-3
Advertisement
Table of Contents
