Table of Contents
Advertisement
Installing the Software
When you install the printer driver and Desktop Manager, you are also installing
the fax and scan drivers; the Desktop Manager Background; and the Desktop
Manager utility programs.
The Desktop Manager software is installed in the C:\MPASS drive and directory
on your local hard disc, unless you specify another drive and/or directory during
the installation process. The installation process changes some of your system
files.
During the installation, you are prompted to enter certain fax setup information.
This information can later be changed in the Desktop Manager, as described in a
later chapter.
The fax setup information you enter during the installation adjusts corresponding
settings in your MultiPASS L90. Therefore, any fax information you may have set
manually in the MultiPASS L90 is replaced by the information you enter when
installing the Desktop Manager.
During installation, the MultiPASS Background is automatically added to your
Windows StartUp group. This setup enables your system to automatically start
the MultiPASS Background each time you start Windows.
Preparing for the Installation
Before you actually begin the installation, take some time to prepare the system,
software diskettes, and fax setup information for the process.
2-2
Installing the Desktop Manager Software
Connect the MultiPASS L90 to the parallel port on your computer. For
details, refer to Chapter 2 of the MultiPASS L90 User's Guide.
The selected parallel port must be a dedicated port. The MultiPASS L90 does
not operate with a redirected or virtual parallel port.
Chapter 2
Advertisement
Table of Contents
