Table of Contents
Advertisement
Speed
You set the transmission speed used to receive faxes. The higher the setting,
the faster the fax is received. If you experience problems when receiving
faxes, try a lower speed setting.
Error Correction
You select this option to reduce system and line errors when receiving a fax.
With this option selected, the system checks each incoming fax for lost data. If
data has been lost from a portion of a page, the system receives that portion
again after confirming that all data within that portion can be received
successfully.
Restriction
You set this option if you want to restrict which incoming faxes you want your
MultiPASS L90 to receive. If you select this option, a fax is received only
where the last six characters of the sender's fax number matches the last six
characters of a speed dial assignment you set up on the MultiPASS L90 or in
the Desktop Manager. In other words, to receive a fax when this option is
selected, you must have a speed dial assignment set up for the individual who
may be sending you a fax. If you clear this option, all incoming faxes are
received.
8-12
MultiPASS L90 Setup and Other Utilities in the Desktop Manager
Chapter 8
Advertisement
Table of Contents
