Disconnecting The Multipass Printer - Canon MultiPASS C80 Software User's Manual

When you have corrected the situation, the status message
automatically clears.
Downloading User Settings
This status indicates that the Desktop Manager is saving setup
information to the MultiPASS printer, overriding the information you
may have set manually on the MultiPASS printer.

Disconnecting the MultiPASS Printer

You can disconnect the MultiPASS printer if you want to use the parallel
port for another purpose.
The MultiPASS system automatically detects if a different device is
connected to the port, and stops any communication between the
MultiPASS printer and Desktop Manager. Later, when you reconnect the
MultiPASS printer, you must restart the communication between the
MultiPASS printer and the MultiPASS system on your computer.
To disconnect the MultiPASS printer:
1. Turn off your computer.
2. Unplug your computer from all electrical sources.
3. Unplug the MultiPASS printer from all electrical sources.
4. On the back of your computer, remove the cable connector from the
parallel printer port.
5. On the MultiPASS printer, release the wire clips and remove the cable
connector from the port.
6. Plug your computer back in to the electrical source.
8-28 MultiPASS Printer Setup and Other Utilities in the Desktop Manager Chapter 8