Setting Up Receive Fax Options - Canon MultiPASS L90 Software User's Manual

Setting Up Receive Fax Options

You can change the following options on the Receive Fax tab.
Chapter 8
Fax Heading Position
You select where you want the sent fax heading information (your fax
number, your name, and date and time) to print on the faxes you send. This
information is know as the Transmit Terminal Identification (TTI).
Fax Heading Mark
You select the prefix that you want to include with your fax number, when the
fax number is printed in the fax header (TTI) information of a sent fax.
On Error Resend
You select this option if you want the MultiPASS L90 to automatically redial
if an error occurs while sending a fax. If this option is selected, you also select
which pages should be resent: only the page on which the error occurred, the
page on which the error occurred and the first page of the fax, or all pages.
On Error Erase Failed Faxes
You select this option to have the MultiPASS L90 automatically erase a fax
after it has been sent successfully, but that originally had an error in sending.
If this option is not selected, the fax document remains in the MultiPASS L90
memory even if an error occurred during the sending.
MultiPASS L90 Setup and Other Utilities in the Desktop Manager 8-9