Table of Contents
Advertisement
In accordance with recent amendments to the FCC rules governing the use of
facsimile equipment, you are now required to include your fax number, your
name or company name, and the date and time of the fax you are sending every
time that you send a fax. Be sure to enter this information during installation.
If you are attempting to reinstall the Desktop Manager software, you must first
uninstall your current installation of the software. For instructions on uninstalling
the software, refer to Chapter 8, "MultiPASS L90 Setup and Other Utilities in the
Desktop Manager".
Overwriting the MultiPASS L90 Options
If you set up options on the operation panel of your MultiPASS L90 (such as
speed dial assignments), these options will be overwritten by the Desktop
Manager software:
To remind you that the MultiPASS L90 options you set up from the operation
panel will be overwritten, the Desktop Manager displays a dialog box with a
reminder message.
2-4
Installing the Desktop Manager Software
Start Windows. If any Windows applications are open, close the applications.
If you install the Desktop Manager software only when Windows applications
are closed, you ensure that the Desktop Manager software installs properly.
For Windows 95, when the installation of the Desktop Manager software is
completed and you choose to launch the MultiPASS Background
After installation, whenever you open the MultiPASS Background (which
occurs whenever you start Windows or the Desktop Manager)
After installation, when you save a change to the setup options in the Desktop
Manager (as described in Chapter 8, "MultiPASS L90 Setup and Other
Utilities in the Desktop Manager").
Chapter 2
Advertisement
Table of Contents
