Table of Contents
Advertisement
Paper Is Not Loading Correctly
9-6
Frequently Asked Questions
Is printing not finishing?
If print jobs vanish, it might be that another Windows application is trying to
use the same port as the MultiPASS L90. Try selecting the Desktop Manager
Spooling option in the Desktop Manager Setup Options dialog box. This
affects only MultiPASS L90 printing.
When the MultiPASS L90 memory is being used for such tasks as delayed
transmission, redial, and memory receiving, the MultiPASS L90 cannot use its
memory for printing.
Does the job not print when using DOS?
The MultiPASS L90 printer driver can be used to print documents only in
Windows; it cannot print a job in DOS.
Is the document print with undesirable results?
You may experience undesirable results when printing a document if you have
the Windows Printing System (or other bi-directional device, such as a later
model laser printer) installed on your computer and you are attempting to use
the same port on which you also have the MultiPASS L90 connected. Be sure
that the MultiPASS L90 is the only device configured to a particular port. The
MultiPASS L90 operates properly only with a dedicated parallel port.
Does paper not load into the unit?
The paper cassette might contain too many sheets or paper might not be
inserted all the way into the cassette.
Does paper not feed through one sheet at a time?
Be sure to fan the stack of paper before placing it in the cassette. Make sure
the stack of paper does not exceed the paper limit mark. Do not stack more
than 150 sheets in the cassette.
Chapter 9
Advertisement
Table of Contents
