Table of Contents
Advertisement
Speed
You set the transmission speed used to send faxes. The higher the setting, the
faster the transmission. If you experience problems when sending faxes, try a
lower speed setting.
Pause Duration
You set the length of the pause that you may have to insert when dialling a
long distance number.
Error Correction
You select this option to reduce system and line errors when sending a fax.
With this option selected, the system checks each outgoing fax for lost data. If
data has been lost from a portion of a page, the system transmits that portion
again after confirming that all data within that portion can be transmitted
successfully.
Auto Start Send
When you select this option, the unit starts scanning automatically five or ten
seconds after destinations are entered. When you don't select this option, you
must START/COPY to scan the document, or the unit returns to standby
mode after 60 seconds.
Off Hook Alarm
You select this option to turn on the alarm if the telephone handset is off-
hook.
Image Contrast
You select a setting that determines the level of contrast in the faxes you send.
The Standard setting is usually appropriate for most documents. However,
based on the lightness or darkness of your original fax document, you may
prefer to lighten or darken the contrast for the fax transmission.
Image Auto Half-tone
You select this option to have the MultiPASS L90 automatically adjust the
settings for reproducing fax documents that contain halftone images (such as
photographs) or a dark background (such as a newspaper). You do not need
to select this option if you are sending documents that are composed only of
black text on a white background.
8-8
MultiPASS L90 Setup and Other Utilities in the Desktop Manager
Chapter 8
Advertisement
Table of Contents
