Disconnecting The Multipass C5000; Using Multipass Diagnostics - Canon MultiPASS C5000 User Manual

Canon multipass c5000: user manual
Hide thumbs Also See for MultiPASS C5000:
Table of Contents

Advertisement

Disconnecting the MultiPASS C5000

You can disconnect the MultiPASS C5000 if you want to use the parallel
port for another purpose. Before disconnecting your unit, be sure to
close the MultiPASS Background.
1. Turn off your computer.
2. Unplug your computer from all electrical sources.
3. Unplug the MultiPASS C5000 from all electrical sources.
4. On the back of your computer, remove the cable connector from the
parallel printer port.
5. On the MultiPASS C5000, release the wire clips and remove the
cable connector from the port.
6. Plug your computer back into the electrical source.

Using MultiPASS Diagnostics

If you have difficulties with your MultiPASS software or hardware, you
can use the MultiPASS Diagnostics. You use the MultiPASS Diagnostics
to verify your MultiPASS software and hardware installation, and
identify hardware problems.
The MultiPASS Diagnostics produces a report with information you can
use to resolve your problem. You can save the report to an ASCII text file
on your hard drive.
1. Open the MultiPASS Diagnostics.
On the Windows desktop, click Start, and then point to
Programs. On the Programs menu, click Canon MultiPASS
C5000. Then click MultiPASS Diagnostics.
The MultiPASS Diagnostics displays a message indicating if all
tests were performed successfully. Messages appear suggesting
solutions for any problems detected.
8-20
Setup and Other Utilities in the Desktop Manager
Chapter 8

Advertisement

Table of Contents
loading

Table of Contents