Disconnecting The Multipass Printer - Canon MultiPASS L6000 Software Manual

Multipass desktop manager for windows nt
Hide thumbs Also See for MultiPASS L6000:
Table of Contents

Advertisement

Receiving Fax
This status indicates the MultiPASS printer is receiving a fax
document. The Status Monitor window displays the fax number or
name of the sender (if available), and the number of the page
currently being received.
Attention Needed
This status indicates the MultiPASS printer needs your attention for
situations, such as the MultiPASS printer being out of paper. The
Status Monitor window describes the nature of the attention
required.
When you have corrected the situation, the status message
automatically clears.
Error Warning
This status indicates the MultiPASS printer has a problem that needs
your more immediate attention, such as when the Status Monitor can
no longer detect the MultiPASS printer. The Status Monitor window
displays the nature of the problem, with a comment indicating a
corrective action.
When you have corrected the situation, the status message
automatically clears.

Disconnecting the MultiPASS Printer

You can disconnect the MultiPASS printer if you want to use the parallel
port for another purpose. The MultiPASS Service (MPService)
automatically detects if a different device is connected to the port, and
stops any communication between the MultiPASS printer and Desktop
Manager. Later, when you reconnect the MultiPASS printer, you must
restart the communication between the MultiPASS printer and Desktop
Manager.
To disconnect the MultiPASS printer:
1. Turn off your computer.
2. Unplug your computer from all electrical sources.
8-28 MultiPASS Printer Setup and Other Utilities in the Desktop Manager
Chapter 8

Advertisement

Table of Contents
loading

Table of Contents