Table of Contents
Advertisement
Restoring the Default Settings
After making changes, to restore the default settings for the options, click Use
Defaults.
Setting Up Advanced Receive Fax Options
To change the following Advanced Receive Send Fax options, click Advanced on
the Receive Fax tab.
Chapter 8
If your computer is turned on:
You set the MultiPASS L90 to move the fax to the Desktop Manager on
your computer, or to print the fax.
If your computer is turned off:
You set the MultiPASS L90 to print the fax or save the fax in its memory.
If the MultiPASS L90 is out of paper:
You set the MultiPASS L90 to hold the fax in its memory until paper can
be loaded, or to not receive the fax.
If the MultiPASS L90 is low on toner:
You set the MultiPASS L90 to hold the fax in its memory until more toner
is added, or to continue printing the fax although toner is low.
Report Print
You specify whether or not you want a report to print with each fax reception,
or only when there is an error with the fax reception.
MultiPASS L90 Setup and Other Utilities in the Desktop Manager
8-11
Advertisement
Table of Contents
