Table of Contents
Advertisement
When the MultiPASS L90 is connected to your PC, we recommend that you use
the Setup Option in the Desktop Manager for Windows. Do not make your
changes via the operation panel of the MultiPASS L90 menu (DATA
REGISTRATION). MultiPASS L90 data is overwritten by the Desktop Manager
for Windows software.
The following instructions summarise the procedures for changing the
MultiPASS L90 setup options in the Desktop Manager. For additional
information, refer to later sections in this chapter.
To change setup options in the Desktop Manager:
1. On the Setup menu, click the group of setup options you want to change.
2. In the Setup Options dialog box, to display another group of options, click
3. On the appropriate setup tab, specify your changes.
4. To save any changes and close the dialog box, click OK. When prompted,
When you save your changes, MultiPASS L90 setup options are saved in the
Desktop Manager, as well as on the MultiPASS L90.
Chapter 8
the appropriate tab.
choose whether or not you want to overwrite the settings on your
MultiPASS L90.
To exit the dialog box without saving your changes, click Cancel.
MultiPASS L90 Setup and Other Utilities in the Desktop Manager
8-3
Advertisement
Table of Contents
