Table of Contents
Advertisement
You can choose to proceed with the action, overwriting the settings in the
MultiPASS L90. Or, you can cancel the action. By cancelling the action, you can
first make a record of your settings on the MultiPASS L90. When you resume
operation in the Desktop Manager, you can reenter the settings recorded for
your MultiPASS L90 in the Desktop Manager.
Installing in Windows 3.1x
This section provides instructions for installing the MultiPASS L90 printer driver
and Desktop Manager in Windows 3.1x. You can connect the printer driver to the
appropriate printer port during installation (for example, LPT1 or LPT2). You
can later change the connection if necessary.
Once you have completed the printer driver installation, you are reminded to
continue with the installation of the Desktop Manager. When you have
completed the installation, you must restart Windows so that your system detects
and recognises the newly installed device.
To install the printer driver:
1. Insert the backup copy of the printer driver diskette in your diskette drive.
2. In Program Manager, double-click Control Panel (generally found in the
3. In Control Panel, double-click Printers.
4. In the Printers dialog box, click Add. Then click Install.
5. In the Install Driver dialog box, specify the drive where you inserted the
6. In the Add Unlisted or Updated Printer dialog box, click Canon MultiPASS
7. In the Printers dialog box, under Installed Printers, click Canon
8. To exit the Printers dialog box, click Close.
Chapter 2
Main group).
printer driver diskette (typically A:\) and click OK.
L90 printer and click OK.
MultiPASS L90 printer and click Set As Default Printer.
Installing the Desktop Manager Software
2-5
Advertisement
Table of Contents
