5062
5-bin mailbox output bin deflector removal
1.
Remove the mailbox option from the printer.
2.
Remove the mailbox access door roller assembly.
3.
Remove the rear cover. See
4.
Remove the mailbox feed motor with plate assembly. See
removal" on page
5.
If you are removing deflectors 1 through 4, then remove the deflector spring.
6.
Rotate the clips forward that are holding the deflector in place.
7.
Rotate the right side of the deflector out.
4-236
Service Manual
"5-bin mailbox rear cover removal" on page
4-232.
4-239.
"5-bin mailbox feed motor with plate