5062
HTU output option guide removal
1.
Remove the rear standard bin cover. See
2.
Slide the cables through the rear standard bin cover.
HTU output option solenoid removal
1.
Remove the rear standard bin cover. See
2.
Disconnect the output bin solenoid cable (A).
Note: Tie a string to the cable so you can route the new cable through the HTU.
3.
Remove the front standard bin cover. See
4.
Disconnect the plunger (B) from the stopper diverter, and the spring (C) from the solenoid.
4-292
Service Manual
"HTU rear standard bin cover removal" on page
"HTU rear standard bin cover removal" on page
"HTU front standard bin cover removal" on page
4-296.
4-296.
4-280.