230-239 Paper Jams - Lexmark C792e 5062-210 Service Manual

5062
Error code
203.03
203.04
203.05,
203.07
203.08
203.21,
203.22
230–239 paper jams
1.
Open the left access door.
2.
Open the jam access door of the duplexer.
3.
Grasp the jammed paper, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4.
Close the door.
5.
From the operator panel, touch Continue, jam cleared.
2-12
Service Manual
Description
Redrive bubble sensor is never made
or is made late.
Possible cause: Faulty redrive bubble
sensor
Redrive bubble sensor flag broke
early.
Possible causes:
• Incorrect paper settings
• Defective redrive bubble sensor
Redrive bubble sensor does not break
or breaks late.
Possible causes:
• Incorrect paper settings
• Redrive bubble sensor failure
Redrive bubble sensor is never made
or is made late.
Paper path redrive motor stalled or is
under speed.
Possible causes:
• Faulty paper path redrive motor
• Faulty cable/connector
• Faulty system board
2
Action
• Clear away anything in the paper path that might
cause the paper to jam.
• If clearing a paper jam does not fix the problem,
go to "Redrive bubble sensor service check"
on page 2-133.
• Clear away anything in the paper path that might
cause the paper to jam.
• Be sure the paper settings match the media
used.
• Go to "Redrive bubble sensor service check"
on page 2-133.
• Clear away anything in the paper path that might
cause the paper to jam.
• Be sure the paper settings match the media
used.
• Go to "Redrive bubble sensor service check"
on page 2-133.
See "203.03" on page 2-12.
• Check that the waste toner container is latched
correctly in the printer.
• Check for anything in the paper path that might
cause the paper to jam.
• If clearing a paper jam does not fix the problem,
go to "149.xx—Paper path redrive motor
error service check" on page
1
2-74.