Skew (2000-Sheet Input Option) Service Check - Lexmark C792e 5062-210 Service Manual

Step Questions / actions
7 1. Check the 550-sheet tray drive assembly
for damage.
2. Check the 550-sheet tray drive assembly
rollers if they are in contact when the jam
door cover is closed.
Is the 550-sheet tray drive assembly
damaged?

Skew (2000-sheet input option) service check

Step Questions / actions
1 1. Bring the printer up in Diagnostics menu
(turn off the printer, press and hold 3 and
6, turn on the printer, and hold the buttons
until the splash screen appears).
2. Select PRINT TESTS.
3. Select Tray 1 for the paper source.
4. Select Single.
Is the printout skewed?
2 Are there any 550-sheet input options
between the base printer and the 2000-
sheet high-capacity feeder input option?
3 Perform a print test on each of the 550-sheet
input option.
Is one of the 550-sheet input options
causing the skew?
4 1. Remove all 550-sheet input option leaving
the 2000-sheet high-capacity feeder input
option.
2. Perform a print test.
Is the printout skewed?
Yes
Replace the 550-sheet tray
drive assembly. See "550-
sheet tray drive assembly
removal" on page 4-159.
Yes
Go to "Skew" on
page 2-36.
Go to step 3.
Replace the 550-sheet
input option.
or
Go to "Skew (550-sheet
input option) service
check" on page 2-134.
Go to step 5.
No
Replace the 550-sheet
input option.
No
Go to step 2.
Go to step 4.
Go to step 4.
Go to "Skew (550-sheet
input option) service
check" on page 2-134.
2-135
Diagnostic information
5062