Htu Timing Belts (Rear) Removal; Htu To Printer Cable Removal - Lexmark C792e 5062-210 Service Manual

5062

HTU timing belts (rear) removal

1.
Remove all output options from the printer.
2.
Remove the rear redrive cover. See
3.
Remove one of the gears (A) to remove the belt you are replacing.
Note: Remove the center belt to access the other two belts.

HTU to printer cable removal

1.
Remove the right inner cover. See
2.
Remove the screw (A) to disconnect the ground cable.
4-310
Service Manual
"HTU rear redrive cover removal" on page
"HTU right inner cover removal" on page
4-294.
4-300.