5062
Error code
201.03
201.04
201.05,
201.07,
201.08
201.42
201.51
201.52
201.53
201.54
201.55,
201.57,
201.58
2-8
Service Manual
Description
Bubble sensor is never made or is
made late.
Possible causes:
• Faulty bubble sensor
• Faulty fuser connection
Bubble sensor broke early.
Possible causes:
• Incorrect paper settings
• Defective bubble sensor
• Faulty system board
Bubble sensor is never made or is
made late.
A narrow banner media error has
occurred.
Bubble sensor active when printer
powers up or a cover is closed.
(Fuser past life)
Bubble sensor is made early.
(Fuser past life)
Bubble sensor is never made or is
made late.
(Fuser past life)
Bubble sensor broke early.
(Fuser past life)
Bubble sensor is never made or is
made late.
(Fuser past life)
Action
• Clear away anything in the paper path that might
cause the paper to jam.
• If clearing a paper jam does not fix the problem,
go to
"201.03, 201.05, 201.07, 201.08—Paper
Jam error service check" on page
• Clear away anything in the paper path that might
cause the paper to jam.
• Be sure the paper settings match the media.
• Go to
"121.xx—Fuser error service check" on
page
2-60.
See
"201.03" on page
2-8.
• Clear away anything in the paper path that might
cause the paper to jam.
• If clearing a paper jam does not fix the problem,
go to
"Input, S1, narrow media, and near
narrow media sensor service check" on
page
2-121.
See
"201.01" on page
2-7.
See
"201.02" on page
2-7.
See
"201.03" on page
2-8.
See
"201.04" on page
2-8.
See
"201.03" on page
2-8.
2-90.