Step
Questions / actions
5
Check the cable in connector JPP2 for any
other damage.
Is the cable damaged?
6
Remove the staging deflector assembly. See
"Staging deflector assembly removal" on
page
4-135.
Is the cable connected correctly?
7
Replace the input sensor. See
(input, S1, narrow media, near narrow
media) removal" on page
Does the error reoccur?
200.05, 200.07—Paper Jam error service check
Step
Questions / actions
1
Reseat the ITU.
Did the error clear?
2
Open the left access door. Check the input
sensor flag (A) for damage.
Is the input sensor flag damaged?
3
Is the staging deflector assembly
damaged?
4
Replace the ITU.
Did the error clear?
Replace the paper path
cable. See
cables" on page
Go to step 7.
"Sensor
Replace the System Board.
See
4-133.
removal" on page
Problem solved.
Replace the input sensor
See
narrow media, near
narrow media) removal"
on page
Replace the staging
deflector assembly. See
"Staging deflector
assembly removal" on
page
Problem solved.
Yes
"Paper path
7-35.
"System board
4-142.
Yes
"Sensor (input, S1,
4-133.
4-135.
Diagnostic information
5062
No
Go to step 6.
Reseat the cable.
Problem solved.
No
Go to step 2.
Go to step 3.
Go to step 4.
Go to step 5.
2-81