5062
Step
Questions / actions
4
Check if the pick arm assembly is not hanging
down.
Is the pick arm hanging?
5
Press the actuator assembly (B) to lock the
pick arm on its default position.
A
Does the problem persist?
6
Check the 2000-sheet high-capacity feeder
bellcrank assembly if the recoil spring is
loose.
Is the recoil spring fastened on the
bellcrank?
7
Check the tray slide assembly for damage.
Does the tray slide assembly retracts?
2-128
Service Manual
Yes
Go to step 5.
Go to step 6.
B
Go to step 7.
Replace the 2000-sheet
high-capacity feeder media
tray assembly. See
sheet high-capacity
feeder media tray
assembly removal" on
page
4-204.
No
Go to step 6.
Problem solved.
Reinstall the recoil spring.
Replace the 2000-sheet
high-capacity feeder
"2000-
drawer assembly.