Finisher or stacker top cover removal
See
"Finisher assembly" on page 7-23
1.
Remove the option from the printer.
2.
Remove the front cover. See
3.
Remove the rear cover. See
4.
Remove the screw (A) on each side of the top cover.
5.
Open the left access door, and use a screwdriver to force the rear hinge (A) out of the slot by pushing the
door to the front.
for the part number.
"Finisher or stacker front cover removal" on page
"Finisher or stacker rear cover removal" on page
5062
4-248.
4-257.
4-267
Repair information