5062
5.
Clip the cable tie (D).
6.
Use a spring hook to remove the tamper recoil spring (E) for the motor you are removing.
7.
Remove the two screws (F) from the motor you are removing, and remove the motor assembly.
Finisher or stacker tamper recoil spring removal
See
"Finisher assembly (continued)" on page 7-25
1.
Remove the option from the printer.
2.
Remove the top cover. See
3.
Using a spring hook, remove the spring you need to replace.
4-266
Service Manual
for the part number.
"Finisher or stacker top cover removal" on page
4-267.