Schedule Setup - Digital Watchdog DWC-PV2M4T User Manual

Setup -

Schedule Setup

Schedule function enables you to transfer a series of images
in the set time interval via E-mail or FTP. (For more detail,
see 'Transfer Setup').
This function (Schedule Setup) is enabled when the codec is
set to "MJPEG" for channel 2 at "Setup-Video setup".
1 Enable / Disable
Set Schedule function to be enabled or disabled.
Transfer Interval
2
Define time interval of image transfer.
Activation Time
3
Select activation time from Always / Only Scheduled Time.
Always Transfer image at all times.
Only
Transfer image during the scheduled time.
Scheduled Time
To setup 'Only Scheduled Time', you need to define Start time and
End time followed by selecting Days. The setup schedule is
repeated every week.
If End time is earlier than Start time, End time is regarded as next
day.
Ex) Assume you select Tue. If you set Start time as 16:00 and End
Time as 09:00, Alarm Input will work from 4:00pm Tue to 9:00am
Wed.
Click 'Apply' to save all changes.
4
43
1
2
3
4