Transfer Setup - Digital Watchdog DWC-PV2M4T User Manual

Setup -

Transfer Setup

This function is enabled when the codec is set to "MJPEG"
for channel 2 at "Setup-Video setup".
Transfer Mode
1
Select from Disable, FTP and E-Mail (SMTP).
To use image transfer, FTP and SMTP in the next sections must
be configured properly.
Pre/Post Alarm Image
2
Image Transfer due to event is configured by setting Image
transfer rate and Pre/Post alarm duration.
Number
Define Number of image transferred per second.
of Image
Pre-alarm
Define duration of image transfer before an event.
Duration
Post-alarm
Define duration of image transfer after an event.
Duration
Range of Pre/Post alarm duration varies according to the
number of image setting.
3 Click 'Apply' to save all changes.
Descriptions
44
1
2
3