Table of Contents
Advertisement
Quick Links
Star-Light™ Pano 6MP
HD over Coax
DWC-PB753WTW
User Manual
ver.: 03/20
Before installing and using the camera, please read this manual carefully.
nstalling and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
to keep it handy for future reference.
™
bullet camera
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Digital Watchdog Star-Light Pano HD over Coax DWC-PB753WTW
Summary of Contents for Digital Watchdog Star-Light Pano HD over Coax DWC-PB753WTW
- Page 1 Star-Light™ Pano 6MP HD over Coax ™ bullet camera DWC-PB753WTW User Manual ver.: 03/20 Before installing and using the camera, please read this manual carefully. nstalling and using the camera, please read this manual carefully. Be sure to keep it handy for future reference. to keep it handy for future reference.
-
Page 2: Table Of Contents
Contents INTRODUCTION Safety information Features Product and accessories Parts names Dimensions INSTALLATION Installation Connecting the camera to monitors Control board Adjusting the camera's angle OSD MENU Menu tree OSD menu - Exposure OSD menu - Color OSD menu - Day and night OSD menu - Function OSD menu - Motion OSD menu - Privacy... -
Page 3: Safety Information
Safety Information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage This exclamation point symbol is intended to alert the consisting a risk of electric shock is present within user to the presence of important operating and... - Page 4 Safety Information 7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock. 8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fire or electric shock.
- Page 5 Important Safety Instructions 1. Read these instructions. - All these safety and operating instructions should be read before the product is installed or operated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future reference. 3.
- Page 6 Important Safety Instructions 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
- Page 7 Disposal of Old Appliances 1. When this crossed-out wheel bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately form the municipal waste stream stream in accordance to laws designated by the government or the local authorities.
-
Page 8: Features
Features Analog HD over Coax® technology with HD-Analog signal support █ Star-Light™ super low light technology █ 3x 2.1MP/1080p 1/3" image sensor at real-time 30fps █ 6MP 180° panoramic camera █ 3x 4.3mm fixed lenses █ Digital wide dynamic range (D-WDR) █... -
Page 9: Product And Accessories
Product & Accessories Please check if all the camera and accessories are included in the package. Cables Camera Sunshield and Test video cable Torque wrench Sunshield screws Screws and Mounting template Quick setup plastic anchors-4pcs guide NOTE : The ‘ test video cable ’ is used to test the camera by connecting to a portable display. - Page 10 Part name IR LED cable Terminal block Sunshield screws HD Universal 1CH Sunshield HD Universal 2CH HD Universal 3CH HD Universal 4CH Alarm RS485 Ball neck bracket Pan/tilt stoper screw Con cap Lens...
-
Page 11: Dimensions
Dimension Unit: inches (mm) 9.8" ~ 10.62" (250 ~ 270mm) 1.56" 3.79" (116mm) (96.5mm) 6.07" (154.2mm) 9.76" (248mm) 3.07" (78mm) 3.8" (96.7mm) - Page 12 Installation - Instructions Before installing your camera, you have to read the following cautions. 1. You have to check whether the location can bear five times of the weight of your camera. 2. Don’t let the cable to be caught in improper place or the electric line cover to be damaged.
- Page 13 Installation - Cabling Use the diagram below to connect the camera to external devices: Power : connect the camera to a proper power supply. HD Universal BNC Outputs 1~3 : Connect each of the camera’s lenses as a separate output to a DVR supporting HD Universal signal. On the DVR side, each lens will be set as a different channel.
- Page 14 Installation - Cabling Use the diagram below to connect the camera to external devices: Alarm 1# DOUT + ORANGE 1# DOUT - 2# DOUT + YELLOW 2# DOUT - BLUE 3# DOUT + GREEN 3# DOUT - GRAY RS485 : Connect the camera to a controller or the DVR using RS485. 1) WHITE Cable : RS485 - 2) BLACK Cable : RS485 + LED : Connect the camera to a IR Sunshield EX-LED Cable.
- Page 15 Connecting to monitors Use the diagram below to connect to a Monitor or CRT Monitor properly. 12VDC/24VAC COAX UNIVERSAL DVR Test Video Output Channel Selection Switch Monitor - Power Connection - 12VDC/24VAC Dual Voltage (Auto Polarity Detection and Protection) - All cameras are equipped with a test video output for on-site configuration. NOTE : Test Video Output will display video for 60 seconds.
-
Page 16: Control Board
Control Board Test Video Output Channel Selection Switch Hold HD-TVI HD-A 5sec - OSD Joystick : The function setting and video output can be adjusted with OSD joystick. (default : HD-A) Image Mode Switches to HD-TVI mode when press OSD Joystick to left 5sec or longer. Switches to HD-A mode when press OSD Joystick to right 5sec or longer. -
Page 17: Adjusting The Camera's Angle
Adjusting the Camera angle 360˚ 360˚ 90˚ Warning: - Do not rotate more than 360 ˚ - Do not unnecessarily twist too many times. -
Page 18: Menu Tree
OSD Menu Tree EXPOSURE DAY & NIGHT EXPO D&N BRIGHTNESS / SHUTTER / MODE AUTO / COLOR / BW LENS FOCUS ADJ. CDS THRES 0 ~ 20 BACKLIGHT OFF / HME / BLC / WDR CDS MARGIN 0 ~ 20 OFF / LOW / MIDDLE / HIGH EXIT JUMP SAVE &... - Page 19 OSD Menu Tree PRIVACY 4th BNC OUTPUT PANORAMIC OSD MENU PRIV OFF / ON MOTION OFF / ON POLYGON OFF / ON PATROL OFF / ON FIX / CAM1+ / CAM2+ / EXIT JUMP SAVE & EXIT / EXIT STITCH CAM3+ EXIT SETUP...
- Page 20 How to access the Camera’s OSD Menus The camera has three separate sensors, each with its own OSD menu and settings. When adjusting the camera’s settings, each lens/sensor will have their own set of values and settings and will be set separately. In addition, the camera offers a 4 BNC output of a combined 180˚view as a single camera output.
-
Page 21: Osd Menu_Exposure
OSD Menu_Exposure LENS The camera’s lens mode is set by default to AUTO. This allows the camera’s iris automatically EXPOSURE LENS LENS EXPO BRIGHTNESS BRIGHTNESS EXPO D&N FUNC MOTI PRIV EXIT SHUTTER AUTO SHUTTER AUTO LENS FOCUS ADJ FOCUS ADJ BACKLIGHT RETURN RETURN... - Page 22 OSD Menu_Exposure BACKLIGHT EXPOSURE EXPO HME (HIGHLIGHT MASKING EXPOSURE) EXPO D&N FUNC MOTI PRIV EXIT HME allows objects to appear clearly on the screen by LENS BACKLIGHT masking extremely bright areas. To setup HME, set the level and color. DEFOG The lower the setting, the darker the masking areas have to be.
- Page 23 OSD Menu_Exposure EXPOSURE EXPO EXPO D&N FUNC MOTI PRIV EXIT LENS BACKLIGHT DEFOG STARLIGHT 3D DNR HIGH EXIT JUMP DRC (DYNAMIC RANGE COMPRESSOR) DRC enables dark areas in images to become more visible without overexposing the bright areas to create one perfect image. Select from : OFF / ON DEFOG Allows the camera to process a scene that is obscured by fog or weather conditions and provides a visibly improved image.
-
Page 24: Osd Menu_Color
OSD Menu_Color WB MODE COLOR WHITE BAL. C-TEMP 5000K EXPO D&N FUNC MOTI PRIV EXIT R-GAIN WHITE BAL. MANUAL B-GAIN COLOR GAIN RETURN RETURN AUTO Auto Tracking White Balance Control mode compensates for color temperature changes between 2400K˚ and 11000K˚. AUTO-EX Auto White Balance Control mode compensates for color temperature changes lower than 2000K˚... -
Page 25: Osd Menu - Day And Night
OSD Menu_Day & Night Day & Night Setup menu is available on the 2nd sensor only. Setting adjusted in the 2nd sensor will be applied to the 1st and 3rd sensor. D&N MODE DAY / NIGHT D&N EXPO D&N FUNC MOTI PRIV EXIT... -
Page 26: Osd Menu_Function
OSD Menu_Function FUNCTION FUNC EXPO D&N FUNC MOTI PRIV EXIT SHARPNESS EXIT JUMP SHARPNESS 0 ~ 10 - Sets the image sharpness. The higher the number, the sharper the image. -
Page 27: Osd Menu_Motion
OSD Menu_Motion The camera can detect motion and display an alarm on the screen. Motion detection settings must be adjusted for each sensor. MOTION MOTI DET WINDOW EXPO D&N FUNC MOTI PRIV EXIT WINDOW USE DET WINDOW WINDOW ZONE SENSITIVITY DET H-POS MOTION OSD DET V-POS... - Page 28 OSD Menu_Motion The camera can detect motion and display an alarm on the screen. Motion detection settings must be adjusted for each sensor. MOTION MOTI DET WINDOW EXPO D&N FUNC MOTI PRIV EXIT DET WINDOW WINDOW USE SENSITIVITY WINDOW ZONE MOTION OSD DET H-POS TEXT ALARM...
-
Page 29: Osd Menu - Privacy
OSD Menu_Privacy You can hide some parts of the screen for privacy masking. A total of 24 dierent privacy masking zones are available, including 16 square zones and 8 polygon shaped zones. PRIVACY PRIV ZONE NUM EXPO D&N FUNC MOTI PRIV EXIT ZONE DISP... - Page 30 OSD Menu_Privacy You can hide some parts of the screen for privacy masking. A total of 24 different privacy masking zones are available, including 16 square zones and 8 polygon shaped zones. PRIVACY POLYGON PRIV ZONE NUM ZONE DISP EXPO D&N FUNC MOTI...
-
Page 31: Osd Menu_Setup
OSD Menu_Setup SETUP CAM TITLE DEFECT DET EXPO D&N FUNC MOTI PRIV EXIT THRS____ 0000000008 CAM ID 00000000 CNT_____ 0000001023 CAM TITLE ________ FREQUENCY 60Hz LANGUAGE U . D - CHAR SELECT DEFECT_DET KEY_____ 0000000000 L . R - POSOTION INITIAL KEY_____ 0000000000... -
Page 32: Osd Menu_Exit
OSD Menu_Exit EXIT EXIT EXPO D&N FUNC MOTI PRIV EXIT SAVE&EXIT EXIT SAVE & EXIT Exit the OSD menu after saving the recent changes. EXIT Exit the OSD menu without saving any changes. - Page 33 4th BNC Output Panoramic OSD Menu The function setting can be adjusted with remote control through RS485 or UTC. MENU MENU MOTION MOTION PATROL PATROL SLOW STITCH STITCH EXPOSE SEPARATE EXPOSE SEPARATE CAM ID CAM ID EXIT EXIT CAM1 CAM2 CAM3 CAM1 CAM2...
- Page 34 4th BNC Output Panoramic OSD Menu MENU MENU MOTION MOTION PATROL PATROL STITCH CAM1 STITCH CAM2 EXPOSE SEPARATE EXPOSE SEPARATE CAM ID CAM ID EXIT EXIT CAM1 CAM2 CAM3 CAM1 CAM2 CAM3 Stitching adjustment on CAM1 Stitching adjustment on CAM2 MENU MENU MOTION...
- Page 35 4th BNC Output Panoramic OSD Menu The function setting can be adjusted with remote control through RS485 or UTC. MENU MOTION PATROL STITCH EXPOSE SEPARATE CAM ID EXIT CAM1 CAM2 CAM3 CAM ID CAM ID helps to control each camera OSD by external UTC or RS485 communication. The CAM ID can be reset from 1 to 250 from the default value.
-
Page 36: Troubleshooting
Troubleshooting Before sending your camera for repair, check the following or contact our technical specialist. FOR NO VIDEO Check the coaxial cable and make sure it is connected securely. Check the power supply and make sure the camera has the proper voltage and current. Check OSD Joystick switch inside the camera’s housing and confirm the switch’s position matches the signal connection type. - Page 37 Specifications VIDEO Image Sensor 1/2.86” CMOS Sensors x 3 Active Pixels 1944(H) x 1212(V) x 3 Scanning System Progressive scan Freguency 60Hz / 50Hz Signal Technology 6.0 Megapixel Universal (3x2MP Sensors) Synchronization Internal Resolution 6.0 Megapixel (3x 1920x1080 Sensors) F2.0 (30IRE): 0.06 Lux (Color) Minimum Scene Illumination F2.0 (30IRE): 0 Lux (B&W) Universal 6MP (1080p 30fps x 3)
- Page 38 Specifications OPERATIONAL (CONT.) Day and Night AUTO / COLOR / BW Auto Gain Control 0 ~ 10 ON/OFF (4 Zones per Camera, Motion Detection Total 12 Motion Zone) ON/OFF (Box : 16 Zones, Polygon : 8 Zones, Privacy Zones Total 72 Privacy Masks) RS485 / UTC Remote Control ENVIRONMENTAL...
- Page 39 MEMO*...
- Page 42 +1 (904) 999-1309...
Need help?
Do you have a question about the Star-Light Pano HD over Coax DWC-PB753WTW and is the answer not in the manual?
Questions and answers