Smtp Setup - Digital Watchdog DWC-PV2M4T User Manual

Setup -

SMTP Setup

To send/save images by Email, SMTP needs to be setup.
1 Plain, SSL/TLS
Select the SMTP's Security mode from Plain or SSL/TLS.
2
SMTP Server Address
Enter the SMTP Server's Address. If the IP Address form is
incorrect, a message box will appear.
3
Port
Enter the SMPT Serve's port used in the Plain or SSL/TLS
security mode.
4
User ID
Enter the User ID to access the SMTP Server.
Password
5
Enter the Password to access the SMTP Server.
6 E-Mail Sender
Enter the e-mail address of the E-Mail Sender. This will be
the "From" E-Mail when the camera sends an E-mail.
E-M ail Receiver
7
Enter the e-mail address of the E-Mail Receiver. These
addresses will receive notice when the camera sends an
E-mail.
8 Title
Enter the title of the E-Mail to appear when the camera
sends an E-mail notification.
The title of the Email is limited to 40 characters.
9
Message
Enter the content of the E-Mail when camera sends an
E-mail notification.
The message of the Email is limited to 40 characters.
10
Click 'Apply' to save all changes.
46
1
2
3
4
5
6
7
8
9
10