Control Tab - Digital Watchdog DWC-PV2M4T User Manual

Web Viewer Screen -

Control Tab

Live Buffering - When the camera's image is unsmooth
1
1
due to bad network connection, you can setup the camera
to delay streaming live video to adjust and improve image
quality. The camera will store live images for the set
2
duration (in milliseconds).
Video stream - Select which camera stream to display in the
2
3
live view screen.
4
Refer to 'Setup > Basic > Video' to setup the Video Stream.
5
Capture - Capture the live video as a BMP or JPG file.
3
6
The location and file name can be decided after clicking
the button.
7
8
Print - Print the camera's current live image for your records.
4
Record - If you click this button, the current live video
5
will be stored as AVI format file in your PC. During the
recording, you cannot change the Video Format. If you
change the Video Format, the recording will stop.
Recoding directory:
Windows installation
LocalLow\IP NETWORK
Alarm Input Status - Shows the Alarm Input status. If the
6
status of alarm input becomes On, the 'Off' button will
changed to 'On' button and event alert icon( ) will be
displayed on the 'Live video display'. If alarm is removed, the
alarm input status is reset.
Regardless of alarm status, the Alert Icon will remain unless
'Event Display Clear' button is clicked.
Relay Out - Enable or Disable relay out function.
7
Event Display Clear - Remove Event Alert Icons resulted
8
from Alarm Input or Motion detection.
22
driver:\Users\username\AppData\
CAMERA\RECORD\MAC ADDRESS