Table of Contents
Advertisement
Setup -
Alarm Input Setup
Input Device Setup
1
Select input device type from OFF / N.O. / N.C.
Off
Ignore this Input sensor.
NO
The contact is normally open and closed when activated.
NC
The contact is normally closed and open when activated.
2
Activation Time
Select activation time from Always / Only Scheduled Time.
An alarm event is activated whenever sensor
Always
Input is detected.
Only
An alarm event is activated only when sensor
Scheduled Time
input is detected during the scheduled time.
To setup the schedule, you need to define Start time and End time
followed by selecting Days.
If End time is earlier than Start time, End time is regarded as next
day.
Ex) Assume you select Tue. If you set Start time as 16:00 and End
Time as 09:00, Alarm Input will work from 4:00pm Tue to
9:00am Wed.
Operation
Action
3
Define a counter action from Alarm Output / Alarm Image
Transfer / Camera Action when Alarm Input is detected.
Action
Turn ON / OFF Image Transfer. Send image via
Alarm Image
E-mail or FTP server. (See Transfer Setup for
Transfer
more information).
Alarm Output
Activate alarm out (relay).
Output
Select time duration to maintain output.
Duration
Camera
Setup the Camera Action when Alarm in.
Action
Action
Select time duration to maintain action.
Duration
Click 'Apply' to save all changes.
4
41
1
2
3
4
Description
Advertisement
Table of Contents
