Network Setup -
DDNS Registration
If you have DYNAMIC IP service from your
Internet Service Provider (ISP), you will not be able
to tell the current IP address of the IP camera.
To solve this problem, you may register to
our DDNS service.
Check if you are using dynamic addressing for
the camera. If so, register your IP Video Server
on our DDNS website before you configure, setup,
or install the IP Camera.
Even though your IP is not dynamic, you can
register your camera to the DDNS server. This
allows you to remember a simple URL address
instead of complicated series of numbers like
http://201.23.4.76:8078.
For more details, contact our Support Center.
To register IP camera to DDNS, the camera's 'Serial No.' is required.
The 'Serial No.' can be found in section 6 'Setup - DDNS' menu.
To use a public DDNS such as 'dyndns' or 'no-ip', refer to the detail
information on how to use the service.
(Visit the web site: http://www.dyndns.com or
http://www.no-ip.com for more information).
15
Need help?
Do you have a question about the DWC-PV2M4T and is the answer not in the manual?