Osd - Motion Setup & Alarm Input - Digital Watchdog x12 WDR PTZ User Manual

OSD -
MOTION SETUP & ALARM INPUT SETUP
1
MOTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
PRESET LOCK
PWR UP ACTION
AUTO FLIP
JOG MAX SPEED
JOG DIRECTION
FRZ IN PRESET
<PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT
Press Near/Enter Key
2
ALARM INPUT SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
ALARM 1 N.O NOT USED
ALARM 2 N.O NOT USED
BACK
EXIT
Press Near/Enter Key
3
ALARM INPUT SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
ALARM 1 N.O NOT USED
ALARM 2 N.O NOT USED
BACK
EXIT
Joystick Right
4
ALARM INPUT SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
ALARM 1 N.O NOT USED
ALARM 2 N.O
NOT USED
BACK
EXIT
Joystick Down
5
ALARM INPUT SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
ALARM 1 N.O PRESET
ALARM 2 N.O
NOT USED
BACK
EXIT
OFF
2
ON
ON
140/SEC
NORMAL
OFF
Note: to properly setup a group for the camera, be sure
1
to have at least 2 Presets, 1 Scan, 1 Patter, and 1 Group setup.
25
This setup is not supported on some models.
ALARM INPUT SETUP
If an external sensor is activated, camera will move to the
corresponding action.
Alarm Type
Sets the sensor input type.
Alarm Action
For each alarm input, you can assign the counteraction functions
(Preset, Scan, Pattern, Group).
3
ALARM TYPE
N.O- Normally Open
N.C- Normally Closed
Note:
Consult your alarm devices manual for N.O and N.C settings.