File Loading - Icom IC-7800 Instruction Manual

12
SET MODE

■ File loading

[F-4•LOAD] [F-5•OPTION]
[F-1•DIR/FILE] [F-2•Y] [F-3•Z]
[F-6•SORT]/[F-6•OK]
[F-7•WIDE]/[F-7•CANCEL]
[EXIT/SET]
12-24
By loading the saved setting file from the CF card, you
can easily set up another IC-7800— several operators
settings can easily be re-set to one IC-7800.
q During set mode menu screen indication, push
[F-7•CF CARD] to select CF card set menu screen.
w Push [F-1•LOAD] to select setting load screen.
• The indicator beside the CF card slot blinks.
• After the CF card contents are displayed, the indicator
goes off.
e Push [F-5•OPTION] to select load option set mode,
then set the desired loading conditions, if desired.
• See page 12-22 for details.
r Push [F-2•Y] or [F-3•Z] to select the desired set-
ting file.
t Push [F-4•LOAD].
• Confirmation screen appears.
y Push [F-6•OK] to starts loading.
• After the lading is completed, the message dialog, "Re-
boot the IC-7800," appears.
u Turn the transceiver power OFF then ON to effec-
tive the setting.