File Loading - Icom IC-7700 Instruction Manual

■ File loading

/
SORT OK
F-6
DIR/FILE ∫ √
F-1 F-2 F-3
/
WIDE CANCEL
F-7
EXIT/SET
LOAD OPTION
F-4 F-5
By loading the saved setting file from the USB-Mem-
ory, you can easily set up another IC-7700—several
operators settings can easily be applied to one IC-
7700.
q During set mode menu screen indication, push
[USB] to select USB set menu screen.
F-7
w Push [LOAD]
• The indicator above the USB connectors and "USB" in-
dicator on the display blink.
• After the USB-Memory contents are displayed, the indi-
cators stop blinking.
e Push [OPTION]
mode, then set the desired loading conditions, if de-
sired.
• See page 12-21 for details.
r Push [Y]
F-2
setting file.
t Push [LOAD]
• Confirmation screen appears.
y Push [OK]
F-6
• After the loading is completed, the message dialog, "Re-
boot the IC-7700," appears.
u Turn the transceiver power OFF then ON to make
the setting effective.
12-23
SET MODE
to select setting load screen.
F-1
to select load option set
F-5
or [Z] to select the desired
F-3
.
F-4
to starts loading.
12