Power Saving - Image Access WideTEK 48C Operation Manual

D.1.3.3 Power Saving
Use the function

Power Saving

can be defined.
Click on the link Power Saving.
The default settings for standby are 15 minutes; the default setting for screen saver is 10
minutes.
Click on the selection arrow to open the list of available values for the respective standby
mode. The list of available values varies with the selected standby mode.
Standby mode
Device standby
Display standby
Screen Saver
Standby Method
Never disables the power save function.
To return to the previous screen click the button Back to Main Menu .
Manual
to set the timers for the standby modes. Three settings
Picture 83: List of power down times
Available values
Page 75