Table of Contents
Advertisement
A.6
Maintenance
Important:
Ensure that no liquids will penetrate into the device housing.
A.6.1
Touchscreen
Before cleaning the touchscreen, switch the
set the main power switch to position 0.
The touchscreen can be cleaned with a micro fiber cloth.
A.6.2
Surfaces
Use a soft, dampened cloth to clean the housing of the scanner. Recommended is a micro
fiber cloth.
A.6.3
Glass plates
Important:
Do not use any cleanser with solvents to clean the glass plates!
The glass plates of the
coating.
It is recommended to clean the glass plates always with a micro fiber cloth.
Dampen the micro fiber cloth slightly before cleaning.
Clean the glass plate with minimum pressure. Do not rub the glass plate on isolated
positions.
After cleaning dry the glass plate with a soft cloth – micro fiber cloth recommended.
A.7
Repair
Note:
There
are
WideTEK® 48C
All repairs and service works should be done by a trained technician only.
Manual
WideTEK® 36C / WideTEK® 48C
not
any
parts
or
scanner which can be repaired by the user.
WideTEK® 36C / WideTEK® 48C
have a special surface
components
of
the
off and
WideTEK® 36C /
Page 17
Advertisement
Table of Contents
Need help?
Do you have a question about the WideTEK 48C and is the answer not in the manual?