D The Setup Level - Image Access WideTEK 48C Operation Manual

D The Setup Level
The setup level is divided in three access levels. The access levels Poweruser and
Admin are password protected.
The User access level allows showing certain information about the system like power up
time, remaining lamp life time or firmware version.
Furthermore the access level User allows setting some basic parameters.
Start your browser and enter the IP address of the scanner to get access to the scanner.
The Scan2Net® main menu will open (see Picture 67).
The Login Screen
On the start screen, click the button Setup Device .
The next screen shows the login levels User , Poweruser and Admin .
Note: The login levels Poweruser and Admin are password protected.
Only trained technicians should use these levels.
Note: Further login levels can be displayed, depending at optionally installed functions.
Manual
Picture 73: Login screen
Page 67