Device Location; Replacing Lamps; Maintenance And Repair; Cleaning - Image Access Bookeye Color Operation Manual

2.3

Device Location

Place the device on a flat and solid base.
The load bearing capacity of the base must correspond to the device weight.
Choose a location that complies with the limits of temperature and humidity. Refer to the
technical specification.
—
Temperature adaptation:
A fast change from cold to warm environmental conditions will build up condensation
inside the housing. This will result in unfavorable scanned images and could cause
permanent damages to the unit.
NOTE: Before use in the new environment allow at least one hour for temperature
adaptation.
2.4

Replacing Lamps

—
Switch off the device at the main power switch before replacing the lamps.
—
As replacement only use original lamps with the prescribed data. Only original lamps
fulfill the light specification.
2.5

Maintenance and Repair

There are not any parts of the BOOKEYE
the user.
All maintenance and repairs should be done by a trained technician.
2.6

Cleaning

—
Switch off the BOOKEYE
—
Unplug the power cable.
—
Use only solvent-free cleaner.
—
Avoid penetration of liquid into the casing during the cleaning.
Operation Manual
®
Color which can be repaired or maintained by
®
Color at the main power switch before doing any cleaning.
Page 11