Maintenance; Touchscreen; Surfaces; Glass Plates - Image Access WideTek 36C Manual

A.6

Maintenance

Important: Ensure that no liquids will penetrate into the device housing.
A.6.1

Touchscreen

Before cleaning the touchscreen, switch the WideTEK
switch to position 0.
The touchscreen can be cleaned with a micro fiber cloth.
A.6.2

Surfaces

Use a soft, dampened cloth to clean the housing of the scanner. Recommended is a micro
fiber cloth.
A.6.3

Glass plates

Important: Do not use any cleanser with solvents to clean the glass plates!
The glass plates of the WideTEK
It is recommended to clean the glass plates always with a micro fiber cloth.
Dampen the micro fiber cloth slightly before cleaning.
Clean the glass plate with minimum pressure. Do not rub the glass plate on isolated
positions.
After cleaning dry the glass plate with a soft cloth – micro fiber cloth recommended.
A.7

Repair

There are not any parts or components of the WideTEK
Note:
can be repaired by the user.
All repairs and service works should be done by a trained technician only.
Manual
® 36C
have a special surface coating.
® 36C
off and set the main power
® 36C
scanner which
Page 17