Region; Time - CAB SQUIX Configuration Manual

6 Configuration
6.1.10

Region

 Start menu.
 Select Setup > Region.
Parameter
Language
Country
Keyboard
Parameters of the Setup > Region menu
Table 18
6.1.11

Time

 Start menu.
 Select Setup > Time.
Parameter
Date
Time
Time zone
Daylight saving
Time synchronisation
> Time server
Parameters of the Setup > Time menu
Table 19
Meaning
Setting the display language
Setting the country-specific date and time formats.
The time formats can also be overwritten via software. The changes are
not saved permanently, however.
Setting of the keyboard layout when using an external keyboard.
Meaning
Setting of the system date in the format DD.MM.YYYY.
The print output of the date occurs in the format set via the Country
parameter.
The date can also be changed via software. The change is not saved
permanently, however.
Setting the system time in the HH:MM:SS format. When changing the
time, ensure that the Timezone, Daylight saving and Date parameters are set
correctly.
The time can also be synchronized automatically via the internet using
the Ethernet interface. The print output of the time occurs in the format
set via the Country parameter.
The time can also be changed via software. The change is not saved
permanently, however.
Adaptation of the time display of the printer to the time zone in relation to
UTC (Universal Time Coordinated).
Selection of the daylight saving regulation applicable for the region. The
time is then changed automatically.
Activation of a service to synchronize date and time of the printer.
IP address of the time server
21
Default
English
Germany
Automatic
(=Country)
Default
-
-
UTC+1
EU
NTP
Aus