Message List; System Log Information - Ricoh SP C400DN User Manual

Monitoring and Configuring the Printer

Message List

This is a list of messages that appear in the printer's system log. The system log
can be viewed using the "syslog" command.

System Log Information

Use the following command to display the system log information:
• UNIX: Use the "syslog" command and "rsh", "rcp", "ftp", and "sftp" parameters.
• telnet : Use the "syslog" command.
Access to NetWare server <file server name>
denied. Either there is no account for this print
server on the NetWare server or the password
was incorrect.
account is unavailable: Same account name be
used.
6
account is unavailable: The authentication
password is not set up.
account is unavailable: encryption is impossi-
ble.
add_sess_IPv4: bad trap<IPv4 address>, com-
munity:<community name>
add_sess_IPv6: bad trap<IPv6 address>, com-
munity:<community name>
add_sess_IPv4: community<community
name> already defined.
add_sess_IPv6: community <community
name> already defined.
add_sess_IPX: bad trap<IPX address>commu-
nity <community name>
add_sess_IPX: community <communi-
tyname> already defined.
Attach FileServer= <file servername>
268
Message Problem and solutions
(In the print server mode) Login to the file
server failed. Make sure that the print server is
registered on the file server. If a password is
specified for the print server, deleteit.
User account is disabled. This could be be-
cause it use the same account name as the ad-
ministrator account.
User account is disabled. This could be be-
cause the authentication password is not set,
and only the encryption account is set.
Encryption is not possible and account is dis-
abled. This could be because:
• Security option is not installed.
• Encryption password has not been speci-
fied.
The IPv4 address (0.0.0.0.) is unavailable when
the community access type is TRAP. Specify
the host IPv4 address for the TRAP destina-
tion.
The IPv6 address [::] is unavailable when the
community access type is TRAP. Specify the
host IPv6 address for the TRAP destination.
The same community name already exists.
Use another community name.
The same community name already exists.
Use another community name.
The IPX address (00:00:00:00:00:00) is unavail-
able when the community access type is
TRAP. Specify the host IPX address for the
TRAP destination.
The same community name already exists.
Use another community name.
Connection to the file server as the nearest
server has been established.