Ricoh SP C400DN User Manual page 98

Configuration
D
Enter the characters using {V}, or {W}, and then press the {OK} key.
You can switch among upper/lower cases, numeric codes, and symbols by
pressing [ABC/123].
When using 64 bit WEP, up to 10 characters can be used for hexadecimal and
up to five characters for ASCII. When using 128 bit WEP, up to 26 characters
can be used for hexadecimal and up to 13 characters for ASCII.
The number of characters that can be entered is limited to 10 or 26 for hexa-
4
decimal and 5 or 13 for ASCII.
For ASCII character strings, each capital letter and lowercase letter is recog-
nized respectively.
E
When entering characters is completed, press [Exit].
F
Press the {Menu} key to return to the initial screen.
G
Print a configuration page to confirm the settings made.
Reference
WEP key can also be set using a Web browser. For details, see Web Image
Monitor Help.
For details about printing the configuration page, see "Test Printing",
Quick Installation Guide.
76