Troubleshooting; If Your Machine Does Not Operate As You Want; When A Message Appears - Ricoh aficio 480w Operating Instructions Manual

If Your Machine Does Not Operate As You
Want

When a Message Appears

The following chart contains explanations of common messages. If other mes-
sages appear, follow the instructions displayed.
Message
Please wait.
Check paper size.
Check original ori-
entation.

3. Troubleshooting

Problem/Causes
The main power has just been
turned on, paper type (plain
paper/translucent pa-
per/film) was changed, or the
machine is otherwise getting
ready.
An improper paper size is set. Select paper manually, do not
The size of the paper loaded is
different to the size of the
copy paper size.
In User Auto Reduce/En-
large, the original is set to L.
In User Auto Reduce/En-
large, the original is set to K.
Solutions
Wait for the machine to fully
warm-up.
Note
❒ When "
Scanning
originals can be
" and "
started. Se-
lect copy mode and
Place original
displayed alternately, you
can make the settings for
your copies and scan your
originals. After the origi-
nals have been scanned,
the machine will automati-
cally start copying after it
has warmed-up. See p.23
"Auto Start".
use Auto Paper Select.
Check the settings for Re-
duce/Enlarge, etc., and then
try again.
For User Auto Reduce/En-
large, set the original to K.
For User Auto Reduce/En-
large, set the original to L.
" are
67